We do have under seat and behind seat storage boxes in black for your 2008 Ford F-450 crew cab with the 60/40 rear bench seat. For an under seat storage unit you can use the Du-Ha Under Seat Storage Box - Black, # DU20067, and for a behind the seat storage unit you can use the Du-Ha Behind Seat Storage Box - Black, # DU20054.
I confirmed with my contact at Du-Ha that both of these items will fit your truck with the 60/40 rear bench seat. view full answer...
Yes, we have the WeatherTech Under Seat Truck Storage Box # WT63SV for your 2022 Ram 1500. This storage box offers a large storage capacity, and has a quick, strap in installation. view full answer...
For a great under-seat storage box that will fit your quad cab on your 2021 Ram 1500, I recommend the WeatherTech Under Seat Truck Storage Box - Black # WT63SV. This box is designed to fit perfectly under the back seat of your truck. As far as installation, it includes an easy strap-in process. view full answer...
We do have storage boxes that were made to fit under the back seat of your 2019 Chevy Silverado 2500 so you can organize all of your equipment. Du-Ha has this box in the following colors:
Black - # DU10300
Dark Brown - # DU10303
Light Gray - # DU10301
Tan - # DU10302
Attached is a review video for you to reference. view full answer...
Yes, we do have a WeatherTech Storage Box for a Quad Cab 2022 Ram 1500. It is the WeatherTech Under Seat Truck Storage Box - Black item # WT63SV. This is custom made to fit your Ram 1500 Quad Cab. The large capacity is perfect for storing jumper cables, tools, and all sorts of supplies. view full answer...
First you will need the etrailer Trailer Hitch Receiver # e98856 for your 2022 Jeep Wrangler. This is a 2" receiver with a matte black finish that will give you a factory appearance. It is rated for up to 350lbs of tongue weight and will tow a trailer weighing up to 3,500lbs. Do be sure to not exceed any towing specifications given by Jeep for your vehicle.
The T-One Vehicle Wiring Harness # 118786 will give you a 4-way flat connector. This is needed for operating the lights on a small... view full answer...
When installing a trailer hitch onto your 2022 Toyota Highlander we have two hitches that will work on Highlanders that have a spare tire mounted underneath. Both The etrailer hitch # e75ZR and The Curt Hitch # C45CR will fit models with an 18 inch or smaller spare tire under the vehicle. Larger spare tires will not be able to be stored under the vehicle.
Between the two hitches I would recommend The etrailer hitch # e75ZR over the curt hitch because it has an extra coating of rust resistant... view full answer...
The diameter of the axle on your 1983 Palomino Pony camper will determine the correct over-under conversion kit that you will need. The Dexter Over-Under Conversion Kit, # K71-385-00, that you referenced will fit a 3 inch diameter trailer axle. We also have an over-under kit for 2-3/8 inch axles as part # K71-384-00.
These are bolt-on kits that do not require you to weld the spring seat to the top of the axle, but the manufacturer strongly recommends tacking the new spring seat to the... view full answer...
The Jeep Wrangler is one of the most popular vehicles to flat tow because they are easy to set up to pull behind your motorhome and are fun to drive once you get where you're going. Tow bar wiring allows your vehicle to have functioning stop, turn, and tail lights while being towed.
To make sure your Jeep has functioning tail lights when towed, a custom-fit plug-in harness can be installed to use the existing lights, the Jeep can be hardwired to use the existing tail lights, or a universal... view full answer...
In order to mount the round 2,000 pound axle under your trailer's leaf springs, we will need to piece together an over-under kit for the 1-3/4 inch outer diameter of the axle. The Dexter Trailer Springs Over-Under Conversion Kits that you referenced are made for axles with a 2-3/8 inch round axle # K71-384-00 or 3 inch round axle # K71-385-00. The Dexter 2,200 pound straight axles have a 1-3/4 inch outer diameter. I have attached a link to all of the 2,000 pound axles we offer.
To mount... view full answer...
Depending on how much clearance you have will determine what will work for you. The MORyde Manual Storage Reel # MR77RR is our smallest reel storage we offer, measuring in at 12-3/4" long, 14-15/16" wide, and 13-7/16" tall. view full answer...
The # APT4 Tandem-Axle Hanger Kit will provide about 4 inches of clearance from the center of the trailer axle to the bottom of the trailer frame, with no load on the axle. This is assuming that your axle tube is 3 inches diameter. If your axle tube is smaller the height will be sightly less. The curve of the springs you select will have some affect also.
I would recommend that you go with the APT5 hanger kit because all of the hangers are the same height and it will make it easier to... view full answer...
Since you have such an anomaly of an axle, at 2-3/4" in diameter, there isn't going to be a flip kit available for you.
The best suggestion I can make is to replace your axles with something more standardized like the Dexter Trailer Axle Beam with E-Z Lube Spindles # 7359765.
However, in order to determine the correct replacement axles for you, I am going to need: the weight capacity, the hub face to hub face measurements, as well as the spring seat to spring seat dimensions.
Once you... view full answer...
The choice of over-under kit for your cargo trailer depends on it's axle size. If you have a 2-3/8-inch diameter axle use kit # K71-384-00; if you have a 3-inch axle use kit # K71-385-00. Both kits include spring seats, nuts, steel spacer nuts, u-bolts and tie plates and are suitable for use on double-eye spring only. You'll need to have the new spring seats tack welded into place on the other side of the axle. view full answer...
The Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 can be used with slipper springs but you would need to tack weld new spring seats to the axle as opposed to bolting them like you would with double eye leaf springs. The reason behind this is because of the increased movement in a slipper spring suspension setup which could jar the spring seat loose if not welded and cause a lot of different problems. You will also need to construct your own u-bolt plate if the spring is... view full answer...
Since your 2022 Mercedes-Benz Sprinter 2500 did not come with the factory tow package you may not have a connector for the brake controller under the seat or under your dash. I have linked an installation video for the Redarc # RED44FR at the bottom of the page which will show you where the connector is and if you can wire it in using the Pigtail # 3063-P and Adapter # 331-TPH-017. As I see you were looking at the Prodigy P3 # 90195 it would only require the Pigtail # 3063-P which is long... view full answer...
Technically the over-under conversion kit can be used with slipper springs if the spring seats are fully welded to the trailer axle and you would have to use a u-bolt plate that fits the springs. Since you have a 2,000 lb axle this doesn't matter since there is not a kit that fits a 1-3/4" diameter axle like the one you have.
You can do the same thing with the U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts # APUBR-10 assuming you have 1-3/4" slipper springs.... view full answer...
From what I was able to determine the Tractor Supply trailer you have likely has a 2000-lbs axle on it, which has a 1-3/4" diameter axle. There isn't a specific over/under conversion kit for that size axle but you can use 2 of the spring seat # TRSS175 and weld them on either end of your axle and then use the # APUBR-10 u-bolts you were looking at to complete the process.
It should be noted that you need to have a qualified welder perform the installation of the spring seats. view full answer...
We don't have an over under kit for your application, but, you can make one.
U-Bolt Plate - 1-3/4" Diameter Trailer Axle - 1-3/4" Wide Spring - 3/8" Bolts # TRTP175173
Spring seats welded to the axle like the Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter # TRSS175
For U-bolts we have the Replacement U-Bolt with Nuts for 1-3/4" Round Trailer Axles - 3/8" Diameter # 175643 but you will most likely need to find longer u-bolts with the other dimensions being... view full answer...
On the 2011 GMC Sierra, there is a tow package wiring bundle under the dash so you will not use a plug int type of wiring harness. What you can use is # HM47685. One end plugs into the brake controller and the other end has blunt cut wires that you will need to splice into the tow package wiring.
The tow package wiring is four or five blunt-cut wires under the left side of the instrument panel. These wires are located above your left shin as you are seated in the drivers seat. The wires... view full answer...
Go To Results